產品介紹
◆ Product Introduction
YTC-3600石油膏壓力填充機是本廠根據國外樣機，結合國內油膏電纜生產廠家的實際需求，為大對數電纜充填石油膏設計制造的專用設備。本機能對3600對以下通信電纜實現一次性壓力填充，不僅大大提高了生產效率，也極大地改善了生產環境，是生產廠家生產油膏電纜的理想設備。
YTC-3600 petroleum jelly pressure filling machine is the special equiment designed and manufactured by our factory for large couple of cable filling petroleum jueely, based on the foreign model machines and combining the actual demａnd of domestic oil jelly cable manufacturer. This machine can achieve primary pressure filling to communication cables less than 3600 couples, which not only greately improves production efficiency, but also significantly improves production environment, and is the ideal equipment for producing oil jelly cable by manufacturers.
本機結構合理，操作簡便，主要電氣元件采用進口產品，提高了設備的控制精度及可靠性。本機適用于盤絞式成纜生產線。
The structure of this machine is reasonable with simple operation. The main electrical components use imported products, which improves the control accuracy and reliability of the equipment. This machine is applicable to drum twister laying-up production line.
◆ 特點
◆ Characterisitcs
◆不銹鋼結構，長期保持油膏清潔；
◆Stainless steel structure, keeping oil jelly cleaning in the long term;
◆壓力腔兩側具有加熱溢油區和柔性刮油機構，使模具中溢出的油膏迅速回流到油箱，減去了油膏的浪費，改善了生產環境；
◆Both sides of pressure chamber have heating oil overflow area and flexible scraping mechanism to make the oil jelly overflowed in the mold quickly reflow to oil tank, reducing the waste of oil jelly and improving production environment;
◆復合模具安裝定位結構設計合理，便于拆卸更換；
◆Composite die is equipped with positioning structure, of which the design is reasonable and easy to remove and replace;
◆系統設置低液位超溫報警功能，出現異常故障自動切斷電源，并具聲光報警；
◆System sets up low liquid overtemperature alarm function. Power supply is automatically cut off in case of abnormal failure with acousto-optic alarm;
◆郵箱油位由儲油設備的供油油泵自動控制，始終保持所需油位。
◆Oil level in oil tank is automatically controlled by oil supply pump of oil storage equipment, and the required oil level is always maintained.
◆ 主要技術參數
◆ Main Technical Parameters
◆ 中心高： 1000±10mm
◆ Height of center: 1000±10mm
◆ 填充對數： ≤3600
◆ Number of couples of filling: ≤3600
◆ 線速度： 30m/min
◆ Maximum line velocity: 30m/min
◆ 充纜直徑： ≤Ф80mm
◆ Charging cable diameter: ≤Ф80mm
◆ 重量： ~1500kg
◆ Weight: ~1500kg
◆ 外形尺寸（長X寬X高）：3600X1600X1900mm
◆ Dimension (length × Width × Height): 3600X1600X1900mm
◆ 工作壓力： 0.8Mpa
◆ Working pressure: 0.8Mpa
◆ 總功率： 38kW
◆ Total power: 38kW
◆ 工作溫度： 120℃
◆ Working temperature: 120℃
◆ 油箱容積： 900 L
◆ Oil tank capacity: 900L
