目錄:廣東樂善智能裝備股份有限公司>>吹瓶機U型機系列>> SCJ-90-65-30U2X2.15F一步法中空擠出機 PE全自動洗滌用品專用吹瓶機 節能吹塑機U型吹瓶機
| 類別Caterory | U型機系列(直線導軌）/U Series(Linear Guide Way) | |||||
| 機型 | SCJ-90-65-30U2×2.15F | |||||
| 項目 | Items | 單位 Units | 參數Specification | |||
| 基本參數 Specification | 類別 | Category | / | 雙層+液位線 2 layers with view stripe | ||
| 制品容積 | Max. Blow Volume | L | 5 | |||
| 適用原料 | Material | / | PE,PP | |||
| 模頭坯料數量 | Qty.Of Die Head | / | 2 | |||
| 常用模頭中心距 | Die Head Distance (Center to Center) | mm | 250，280 | |||
| 機器凈重約 | Net Weight | kg | 15000 | |||
| 機器外形尺寸 | Machine Dimension | mm，L×H×W | 5.1*3.9*4.1 | |||
| 模頭 Die Head | 模頭加熱段數 | Die Head Heating Zone | / | 5 | ||
| 模頭加熱功率 | Die Head Heating Power | kW | 15.6 | |||
| 鎖模架系統 Carriage system | 模架數量 | Qty.Of Station | / | 2 | ||
| 最小合模距 | Min Clamping Distance Of Mold | mm | 250 | |||
| 開模距 | Max Clamping Distance Of Mold | mm | 650 | |||
| 模板尺寸 | Effective Dimension Of Mold Plate | mm W×H | 600x500 | |||
| 擺架行程 | Carriage Stroke | (mm) | 750 | |||
| 鎖模力 | Clamping Force | kN | 196 | |||
| 擠出系統 Extruder Unit | 螺桿直徑 | Extruder Diameter | mm | 90 | 65 | 30 |
| 螺桿長徑比 | Extruder Length/Diameter Ratio | L/D | 24 | 24 | 24 | |
| 螺桿轉速 | Extruder Rotating Speed | r/min | 10-66 | 10~48 | 10~21 | |
| 塑化能力 | Max Extrusion Capacity | kg/h | 160 | 30 | 4 | |
| 擠出電機額定功率 | Extruder Motor Rated Power | kW | 37 | 15 | 2.2 | |
| 機筒加熱段數 | Barrel Heating Zone | / | 4 | 3 | 2 | |
| 機筒加熱功率 | Barrel Heating Power | kW | 17 | 7.2 | 2.6 | |
| 冷卻風機功率 | Cooling Fan Power | kW | 0.72 | 0.12 | / | |
| 動力系統 Power Unit | 油泵電機額定功率 | Oil Pump Motor Rated Power | kW | 15 | ||
| 液壓系統額定工作壓力 | Hydraulic System Rated Working Pressure | Mpa | 16 | |||
| 氣動系統額定工作壓力 | Pneumatic System Rated Working Pressure | Mpa | 0.8 | |||
| 水冷系統額定工作壓力 | Cooling System Rated Working Pressure | Mpa | 0.4 | |||
| 通用制品耗氣量（壓縮后） | Universal product air consumption(compressed) | m³/h | 15 | |||
| 熱切刀變壓器功率 | Hot Cutter Power | kW | 2 | |||
| 裝機總功率I | Total Installed Power I | kW | 114.44 | |||
| 備注 Remarks | 液壓油牌號/油箱容積 | Hydraulic oil NO. / tank volume | L | 46#/300 | ||
| 冷水機選型（風冷/水冷） | Chiller recommend (air-cooled/water-cooled) | hp | 15/10 | |||
| 空壓機選型（加儲氣罐） | Air compressor recommend (Add gas storage tank) | hp | 10 | |||
| 備注/Remarks： | 以上機型均可疊加100點壁厚控制系統，疊加后改變的參數如下/All the machines above can be optionally equipped with 100 points parison control system,parameters would be changed as below: | |||||
| 疊加壁厚控制后 After with 100 points parison control | 機型 | Model | / | SCJ-90-65-30U+S2X2.15F | ||
| 壁厚油泵電機額定功率 | Parison Motor Rated Power | kW | 5.5 | |||
| 裝機總功率II | Total Installed Power II | kW | 119.94 | |||
| 模板尺寸 | Effective Dimension Of Mold Plate | (mm) | ||||
 | ||||||
| 備注： 1、各機型加熱功率與模頭配置有關，因模頭配置不同，可能出現加熱功率稍有差異的情況 2、本參數表僅供參考，實際機型參數可能會有所調整 | ||||||
| Note: 1. The heating power of each model is related to the configuration of the die head. Due to the different configuration of the die head, there may be a slight difference in heating power. 2. This parameter list is for reference only, and the actual model parameters may be adjusted. | ||||||
(空格分隔,最多3個,單個標簽最多10個字符)
3
塑料機械網