目錄:廣東樂善智能裝備股份有限公司>>吹瓶機U型機系列>> SCJ-90U2X6.5G(椰奶)樂善供應 一出六吹瓶機全自動中空吹塑機 機油瓶吹塑機U型機系列(直線導軌)
參考價 | 面議 |
參考價 | 面議 |
更新時間:2021-03-17 11:13:45瀏覽次數:552評價
聯系我們時請說明是塑料機械網上看到的信息,謝謝!
機型 | SCJ-90U2X6.5G(椰奶) | |||
項目 | Items | 單位 Units | 參數Specification | |
基本參數 Specification | 類別 | Category | / | 單層 1 Layer |
制品大容積 | Max. Blow Volume | L | 1.25 | |
適用原料 | Material | / | PE,PP | |
模頭坯料數量 | Qty.Of Die Head | / | 6 | |
常用模頭中心距 | Die Head Distance (Center to Center) | mm | 125 | |
機器凈重約 | Net Weight | kg | 12000 | |
機器外形尺寸 | Machine Dimension | mm,L×H×W | 4853X2700X4314 | |
模頭 Die Head | 模頭加熱段數 | Die Head Heating Zone | / | 13 |
模頭加熱功率 | Die Head Heating Power | kW | 10.6 | |
鎖模架系統 Carriage system | 模架數量 | Qty.Of Station | / | 2 |
小合模距 | Min Clamping Distance Of Mold | mm | 230 | |
大開模距 | Max Clamping Distance Of Mold | mm | 430 | |
模板尺寸 | Effective Dimension Of Mold Plate | mm W×H | 700X390 | |
擺架行程 | Carriage Stroke | (mm) | 850 | |
鎖模力 | Clamping Force | kN | 127 | |
擠出系統 Extruder Unit | 螺桿直徑 | Extruder Diameter | mm | 90 |
螺桿長徑比 | Extruder Length/Diameter Ratio | L/D | 24 | |
螺桿轉速 | Extruder Rotating Speed | r/min | 20-66 | |
大塑化能力 | Max Extrusion Capacity | kg/h | 160 | |
擠出電機額定功率 | Extruder Motor Rated Power | kW | 37 | |
機筒加熱段數 | Barrel Heating Zone | / | 4 | |
機筒加熱功率 | Barrel Heating Power | kW | 17 | |
冷卻風機功率 | Cooling Fan Power | kW | 0.72 | |
動力系統 Power Unit | 油泵電機額定功率 | Oil Pump Motor Rated Power | kW | 18.5 |
液壓系統額定工作壓力 | Hydraulic System Rated Wong Pressure | Mpa | 16 | |
氣動系統額定工作壓力 | Pneumatic System Rated Wong Pressure | Mpa | 0.8 | |
水冷系統額定工作壓力 | Cooling System Rated Wong Pressure | Mpa | 0.4 | |
通用制品耗氣量(壓縮后) | Universal product air consumption(compressed) | m³/h | 19 | |
冷切刀 | Hot Cutter Power | kW | 0 | |
裝機總功率I | Total Installed Power I | kW | 83.82 | |
備注 Remarks | 液壓油牌號/油箱容積 | Hydraulic oil NO. / tank volume | L | 46#/200 |
冷水機選型(風冷/水冷) | Chiller recommend (air-cooled/water-cooled) | hp | 15/10 | |
空壓機選型(加儲氣罐) | Air compressor recommend (Add gas storage tank) | hp | 10 | |
備注/Remarks: | 以上機型均可疊加100點壁厚控制系統,疊加后改變的參數如下/All the machines above can be optionally equipped with 100 points parison cool system,parameters would be changed as below: | |||
疊加壁厚控制后 After with 100points parison cool | 機型 | Model | / | SCJ-90U+S2x6.5G |
壁厚油泵電機額定功率 | Parison Motor Rated Power | kW | 5.5 | |
裝機總功率II | Total Installed Power II | kW | 89.32 | |
模板尺寸 | Effective Dimension Of Mold Plate | (mm) |
(空格分隔,最多3個,單個標簽最多10個字符)