今日要聞
推薦展會
更多 > >
推薦專題
更多 > >
谷輪渦旋壓縮機缺油故障的預防以及解決方法
我們知道，制冷壓縮機缺油運行，對其本身的造成的損傷是無法逆轉的。這條規則，對于谷輪渦旋壓縮機同樣適用。本文中我們將以谷輪ZB38KQ-TFD-558為例來講解。，渦旋壓縮機內部缺油長時間會導致機構部和各摩擦副過熱，導致軸承燒結、抱軸；即使短時間缺油也會導致機構部和各摩擦副異常磨損，導致振動、噪音大。
We know that the compressor compressor running without oil, the damage to its own can not be reversed. This rule is also applicable to the scroll compressor. In this paper, we will take Valley wheel ZB38KQ-TFD-558 as an example to explain. First of all, the scroll compressor internal oil long time will lead to overheating mechanism and the side friction, sintering, lead to bearing axle; even for a short time lack of oil can also cause the friction mechanism and lead to abnormal wear, vibration, noise.
以谷輪ZB38KQ-TFD-558為例，循環量在ARI工況下約為330kg/h，壓縮機在排出冷媒時，也會排出微量的冷凍機油。即使只有0.5%的上油率，如果油不能通過系統循環回到機器中，則在50分鐘就可以將壓縮機內的油全部帶出，大約在2～5小時內壓縮機將會燒壞。
Take the wheel ZB38KQ-TFD-558 as an example, the circulation volume is about 330kg/h under the ARI condition, and the compressor will discharge a little refrigerator oil when the refrigerant is discharged. Even if only 0.5% of the oil rate, if the oil can not return to the machine through the system cycle, then in 50 minutes you can bring all the oil out of the compressor, in about 2~5 hours, the compressor will burn out.
預防方法： 1、確保排出壓縮機的冷凍機油回到壓機內；2、減少壓機的上油率。（壓機頻繁啟動不利于回油。）
Preventive measures: 1. Ensure that the refrigerator oil of the compressor is returned to the press; 2, reduce the oil rate of the compressor. (press starts frequently, which is bad for oil return)
上一篇：質子交換膜的透氣性測試方法
下一篇：負極材料拌料機有哪些優勢？
- 凡本網注明"來源：塑料機械網"的所有作品，版權均屬于塑料機械網，轉載請必須注明塑料機械網，http://www.jeefix.com。違反者本網將追究相關法律責任。
- 企業發布的公司新聞、技術文章、資料下載等內容，如涉及侵權、違規遭投訴的，一律由發布企業自行承擔責任，本網有權刪除內容并追溯責任。
- 本網轉載并注明自其它來源的作品，目的在于傳遞更多信息，并不代表本網贊同其觀點或證實其內容的真實性，不承擔此類作品侵權行為的直接責任及連帶責任。其他媒體、網站或個人從本網轉載時，必須保留本網注明的作品來源，并自負版權等法律責任。
- 如涉及作品內容、版權等問題，請在作品發表之日起一周內與本網聯系，否則視為放棄相關權利。
