目錄:廣東樂善智能裝備股份有限公司>>*吹瓶機>> 100Y+H+S1X1.100D全自動化工桶塑料吹塑機 吹桶吹瓶機 100L大型吹塑機設備*吹瓶機
| 類別Category | 小Y型機系列(3導柱型Petg機）/Y Series(3 Tie Bar for Petg bottles) | |||
| 機型 Model | 100Y+H+S1X1.100D | |||
| 項目 | Items | 單位 Units | 參數Specification | |
| 基本參數 Specification | 類別 | Category | / | 直線導軌Linear Guide Way |
制品大容積 | Max. Blow Volume | L | 100 | |
| 適用原料 | Material | / | PE,PP,PS,PC,PVC | |
| 模頭坯料數量 | QTY Of Die Head | / | 1 | |
| 常用模頭中心距 | Die Head Distance (Center to Center) | mm | / | |
| 機器凈重約 | Net Weight | kg | 11500 | |
| 機器外形尺寸 | Machine Dimension | mm L×H×W | 5940X3800X2100 | |
| 模頭 Die Head | 模頭加熱段數 | Die Head Heating Zone | / | 3 |
| 模頭加熱功率 | Die Head Heating Power | kW | 22 | |
| 鎖模架系統 Carriage system | 模架數量 | QTY Of Station | / | 1 |
| 小合模距 | Min Mold Closing Distance | mm | 500 | |
| 大開模距 | Max Mold Openning Distance | mm | 1200 | |
| 模板尺寸 | Effective Dimension Of Mold Plate | (mm,W×H) | W1050×H1350 | |
| 擺架行程 | Carriage Stroke | (mm) | / | |
| 鎖模力 | Clamping Force | kN | 500 | |
| 擠出系統 Extruder Unit | 螺桿直徑 | Extruder Diameter | mm | 100 |
| 螺桿長徑比 | Extruder Length/Diameter Ratio | L/D | 27 | |
| 螺桿轉速 | Extruder Rotating Speed | r/min | 20-71 | |
| 大塑化能力 | Max Extrusion Capacity | kg/h | 230 | |
| 擠出電機額定功率 | Extruder Motor Rated Power | (kW) | 75/90 | |
| 機筒加熱段數 | Barrel Heating Zone | / | 5 | |
| 機筒加熱功率 | Barrel Heating Power | kW | 30 | |
| 冷卻風機功率 | Cooling Fan Power | kW | 1.85 | |
| 動力系統 Power Unit | 油泵電機額定功率 | Oil Pump Motor Rated Power | kW | 30 |
| 液壓系統額定工作壓力 | Hydraulic System Rated Wong Pressure | Mpa | 16 | |
| 氣動系統額定工作壓力 | Pneumatic System Rated Wong Pressure | Mpa | 0.8 | |
| 水冷系統額定工作壓力 | Cooling System Rated Wong Pressure | Mpa | 0.4 | |
| 通用制品耗氣量（壓縮后） | Universal product air consumption(compressed) | m³/h | 20 | |
| 熱切刀變壓器功率 | Hot Cutter Power | kW | / | |
| 裝機總功率I | Total Installed Power | kW | 166.35/181.35 | |
| 備注 Remarks | 液壓油牌號/油箱容積 | Hydraulic oil NO. / tank volume | L | 46#/80L |
| 冷水機選型（風冷/水冷） | Chiller recommend (air-cooled/water-cooled) | hp | 15/10 | |
| 空壓機選型（加儲氣罐） | Air compressor recommend (Add gas storage tank) | hp | 10 | |
| 備注： 1、各機型的加熱功率與模頭配置有關，因模頭配置不同，可能出現加熱功率稍有差異的情況。 2、本參數表僅供參考，實際機型參數可能會有所調整。 | ||||
| Note: 1. The heating power of each model is related to the configuration of the die head. Due to the different configuration of the die head, there may be a slight difference in heating power. 2. This parameter list is for reference only, and the actual model parameters may be adjusted. | ||||
3
塑料機械網