目錄:廣東樂善智能裝備股份有限公司>>電液混合EH系列>> SCJ-85EH2X8.5D(80)廣東供應中空擠出機 日用品食品包裝類吹瓶機 ABS自動吹塑機電液混合EH系列
| 類別Category | K型機系列(4導柱型）/K Series(4 Tie Bar) | |||||
| 機型 Model | SCJ-85EH2X8.5D(80) | |||||
| 項目 | Items | 單位 Units | 參數Specification | |||
| 基本參數 Specification | 類別 | Category | / | 單層 1 layers | ||
| 制品大容積 | Max. Blow Volume | L | 0.5 | |||
| 適用原料 | Material | / | PE,PP | |||
| 模頭坯料數量 | QTY Of Die Head | / | 8 | |||
| 常用模頭中心距 | Die Head Distance (Center to Center) | mm | 80 | |||
| 機器凈重約 | Net Weight | kg | 12000 | |||
| 機器外形尺寸 | Machine Dimension | m L×H×W | 4X2.6X4.6 | |||
| 模頭 Die Head | 模頭加熱段數 | Die Head Heating Zone | / | 17 | ||
| 模頭加熱功率 | Die Head Heating Power | kW | 8.5 | |||
| 鎖模架系統 Carriage system | 模架數量 | QTY Of Station | / | 2 | ||
| 小合模距 | Min Mold Closing Distance | mm | 250 | |||
| 大開模距 | Max Mold Openning Distance | mm | 450 | |||
| 模板尺寸 | Effective Dimension Of Mold Plate | (mm,W×H) | W600×H370 | |||
| 擺架行程 | Carriage Stroke | (mm) | 750 | |||
| 鎖模力 | Clamping Force | kN | 127 | |||
| 擠出系統 Extruder Unit | 螺桿直徑 | Extruder Diameter | mm | 85 | / | / |
| 螺桿長徑比 | Extruder Length/Diameter Ratio | L/D | 24 | / | / | |
| 螺桿轉速 | Extruder Rotating Speed | r/min | 10-67 | / | / | |
| 大塑化能力 | Max Extrusion Capacity | kg/h | 130 | / | / | |
| 擠出電機額定功率 | Extruder Motor Rated Power | (kW) | 30 | / | / | |
| 機筒加熱段數 | Barrel Heating Zone | / | 3 | / | / | |
| 機筒加熱功率 | Barrel Heating Power | kW | 10.5 | / | / | |
| 冷卻風機功率 | Cooling Fan Power | kW | 0.54 | / | / | |
| 動力系統 Power Unit | 油泵電機額定功率 | Oil Pump Motor Rated Power | kW | 4.5 | ||
| 液壓系統額定工作壓力 | Hydraulic System Rated Wong Pressure | Mpa | 3 | |||
| 氣動系統額定工作壓力 | Pneumatic System Rated Wong Pressure | Mpa | 2.2 | |||
| 水冷系統額定工作壓力 | Cooling System Rated Wong Pressure | Mpa | 15 | |||
| 通用制品耗氣量（壓縮后） | Universal product air consumption(compressed) | m³/h | 23 | |||
| 熱切刀變壓器功率 | Hot Cutter Power | kW | 2 | |||
| 裝機總功率I | Total Installed Power | kW | 83.74 | |||
| 備注 Remarks | 液壓油牌號/油箱容積 | Hydraulic oil NO. / tank volume | L | 46#/160L | ||
| 冷水機選型（風冷/水冷） | Chiller recommend (air-cooled/water-cooled) | hp | 10 | 8 | ||
| 空壓機選型（加儲氣罐） | Air compressor recommend (Add gas storage tank) | hp | 10 | |||
| 備注/Remarks： | 以上機型 Model均可疊加100點壁厚控制系統，疊加后改變的參數如下/All the machines above can be optionally equipped with 100 points parison cool system,parameters would be changed as below: | |||||
| 疊加壁厚控制后 After with 100 points parison cool | 機型 Model | Model | / | SCJ-85EH2X8.5D(80) | ||
| 壁厚油泵電機額定功率 | Parison Servo Motor Rated Power | kW | 4.5 | |||
| 裝機總功率II | Total Installed Power | kW | 88.24 | |||
| 鎖模板示意圖 Clamping plate | ||||||
 | ||||||
| 備注： 1、各機型的加熱功率與模頭配置有關，因模頭配置不同，可能出現加熱功率稍有差異的情況。 2、本參數表僅供參考，實際機型參數可能會有所調整。 | ||||||
| Note: 1. The heating power of each model is related to the configuration of the die head. Due to the different configuration of the die head, there may be a slight difference in heating power. 2. This parameter list is for reference only, and the actual model parameters may be adjusted. | ||||||
3
塑料機械網