| 型號規格 Specifications | 單位 UNIT | CH450F |
| *號International size rating | 2650 |
| 注射裝置 INJECTION UNIT | | A | B | C |
| 螺桿直徑 Screw diameter | mm | 70 | 75 | 80 |
| 螺桿長徑比Screw L/D ratio | L/D | 22 | 20 | 19 |
| 理論注射容Theoreticai shot volume | cm3 | 1462 | 1679 | 1910 |
| 注射量 Shot weight(PS) | g | 1331 | 1528 | 1738 |
| OZ | 46.9 | 53.9 | 61.3 |
| 注射壓力 Injection pressure | Bar | 1817 | 1583 | 1391 |
| 注射速率 Injection rate(PS) | g/s | 334 | 383 | 436 |
| 射膠行程 Injection stroke | mm | 380 |
| 螺桿轉速 Max.screw speed | rpm | 156 |
| 塑化能力Plasticizing capacity(PS) | g/s | 58.1 | 67.5 | 72.9 |
| 射嘴接觸力Nozzle sealing force | KN | 141 |
| 鎖模裝置 CLAMPING UNIT | | |
| 鎖模力 Clamping force | KN | 4500 |
| 開模行程Opening stroke | mm | 740 |
| 拉桿內間距Distance between tie-bars | mm | 830x780 |
| 小模具尺寸Min mould dimension | mm | 540x510 |
| 小模厚 Max.mold height | mm | 780 |
| 小模厚 Min.mold height | mm | 300 |
| 模板大開距MAX.Dalylight | mm | 1520 |
| 頂出行程Ejector stroke | mm | 180 |
| 頂出力 Ejector force | KN | 110 |
| 頂出數 No.of ejector pins | PCS | 12+1 |
| 其它 OTHERS | | |
| 系統壓力 System pressure | Mpa | 16 |
| 油泵排量 Hydraulic pump capacity | CC | 160 |
| 電馬達功率Drive mootor power | kw | 45 |
| 電熱功率 Heator Power | kw | 29.5 |
| 加熱段數No.of heater zones | pcs | 4+1 |
| 外形尺寸Machine dimensions(LxH) | m | 7.4x2.05x2.3 |
| 理論機重 Machine weight | Tom | 18 |
| 容積 Oil tank capacity | L | 700 |
| 模板正面尺寸圖 Platen dimensions | |
| 模板側面尺寸圖 Mould space dimensions |
