Motor types
Asynchronous motors, synchronous servo motors
Encorder interfaces
Standard
EnDat® 2.1/2.2 digital, incremental, SSI
With terminal module
EnDat® 2.1 sin/cos, resolver: REA 5001
Pulse/direction signals: REA 5001, SEA 5001, XEA 5001
Communication modules
Optional accessory module for field bus connection:
CANopen® DS-301: CAN 5000
EtherCAT®: ECS 5000
PROFIBUS® DP-V1: DP 5000
PROFINET®: PN 5000
Safety functions
STO, SS1 (SIL 3, PL e, category 3)
Terminal modules
Optional accessory module for analog and binary inputs and
outputs as well as encoder interfaces:
REA 5001
SEA 5001
XEA 5001
Features
Isochronic system bus (IGB) for parameterization and multi-axis applications
Integrated brake control
Fast commissioning with POSITool software
Removable data storage Paramodul for commissioning and service
Automatic motor parameterization from the electronic motor rating plate
Integrated line filter
Project planning & commissioning
The 5th generation of POSITool project planning and commissioning software has all the functions needed for efficient use of inverters in single and multi-axis applications.
UL compliance
The inverters are UL and cUL (CSA UL) listed and meet the requirements of UL 508C and UL 840 standards.
CE compliance
All units of the 5th STOBER inverter generation conform to the applicable EMC Directives and meet the criteria of Low Voltage and Machine Directive.
Standard features comprise an effective range of measures, among them an integral EMC filter and the high-quality galvanized sheet steel housing. Levels and terms apply as defined by IEC 1131. All inverters are CE-marked.
Asynchronous motors, synchronous servo motors
Encorder interfaces
Standard
EnDat® 2.1/2.2 digital, incremental, SSI
With terminal module
EnDat® 2.1 sin/cos, resolver: REA 5001
Pulse/direction signals: REA 5001, SEA 5001, XEA 5001
Communication modules
Optional accessory module for field bus connection:
CANopen® DS-301: CAN 5000
EtherCAT®: ECS 5000
PROFIBUS® DP-V1: DP 5000
PROFINET®: PN 5000
Safety functions
STO, SS1 (SIL 3, PL e, category 3)
Terminal modules
Optional accessory module for analog and binary inputs and
outputs as well as encoder interfaces:
REA 5001
SEA 5001
XEA 5001
Features
Isochronic system bus (IGB) for parameterization and multi-axis applications
Integrated brake control
Fast commissioning with POSITool software
Removable data storage Paramodul for commissioning and service
Automatic motor parameterization from the electronic motor rating plate
Integrated line filter
Project planning & commissioning
The 5th generation of POSITool project planning and commissioning software has all the functions needed for efficient use of inverters in single and multi-axis applications.
UL compliance
The inverters are UL and cUL (CSA UL) listed and meet the requirements of UL 508C and UL 840 standards.
CE compliance
All units of the 5th STOBER inverter generation conform to the applicable EMC Directives and meet the criteria of Low Voltage and Machine Directive.
Standard features comprise an effective range of measures, among them an integral EMC filter and the high-quality galvanized sheet steel housing. Levels and terms apply as defined by IEC 1131. All inverters are CE-marked.
| Type | Size | Nominal output current (4 kHz) [A] | Max. output current (4 kHz) [A] | Nominal output current (8 kHz) [A] | Max. output current (8 kHz) [A] | Dimensions [mm] |
| SDS5007A | 0 | 4 | 7.2 | 3 | 7.5 | 300 x 70 x 175 |
| SDS5008A | 0 | 2.3 | 4.2 | 1.7 | 4.3 | 300 x 70 x 175 |
| SDS5015A | 0 | 4.5 | 8.1 | 3.4 | 8.5 | 300 x 70 x 175 |
| SDS5040A | 1 | 10 | 18 | 6 | 15 | 300 x 70 x 260 |
| SDS5075A | 1 | 16 | 28.8 | 10 | 25 | 300 x 70 x 260 |
| SDS5110A | 2 | 22 | 39.6 | 14 | 35 | 300 x 105 x 260 |
| SDS5150A | 2 | 32 | 57.6 | 20 | 50 | 300 x 105 x 260 |
| SDS5220A | 3 | 44 | 79.2 | 30 | 75 | 382.5 x 190 x 276 |
| SDS5370A | 3 | 70 | 126 | 50 | 125 | 382.5 x 190 x 276 |
| SDS5450A | 3 | 85 | 153 | 60 | 150 | 382.5 x 190 x 276 |
