一、工作原理與應用范圍介紹

 Introduction of Working Principle and Scope of Application

中藥浸膏經高速離心式噴霧盤高速旋轉噴化后與熱風充分進行傳熱傳質從而達到快速低溫脫除水分之目的。物料霧滴經瞬間脫除水分獲得干的粉狀產品，是熱敏性物質與粘性物質選擇的干燥裝置。適用于熔點低、含糖高的中藥產品和植物提取液的低溫快速干燥脫水，并可設防粘壁、防物料焦化、防吸潮結構來滿足工藝所需要求。該裝置解決了許多熔點低、含糖高的中藥產品不能用噴霧干燥的技術難點。中藥浸膏噴霧

     After the high-speed rotary spraying with the high-speed centrifugal spray disk and sufficient heat and mass transfer with hot air, the Chinese medical extract can be dehydrated at a low temperature rapidly. Dry powdery products are obtained after instant dehydration of material fogdrop. It is optimal drying device for heat-sensitive and viscous materials. It is applicable to the low-temperature and rapid drying and dehydration of traditional Chinese medicines and plant extracts of a low melting point and high content of sugar, and a structure that can prevent wall sticking, coking materials and moisture absorption can be set. The device solves the technological difficulty with many traditional Chinese medicines that have a low melting point and high content of sugar.

二、特點Characteristics

1.干燥過程中液滴的溫度比較低，特別適用于熱敏性物料干燥，能夠保持產品優良品質。

2.為防止干燥塔產生粘壁現象，可設置夾層冷卻結構，有效地防止產品的粘壁、焦化現象。提高產品質量、收率。

3.可配置成品風送系統將干燥成品與系統內的熱濕空氣及時分離，避免了干燥成品的吸濕或結塊的可能性。

1.The temperature of liquid drops is low during drying. It is particularly applicable to the drying of heat sensitive materials and can maintain the quality of products to the greatest extent.

2.In order to prevent wall sticking with the drying tower, a sandwich cooling structure can be set to effectively prevent wall sticking and coking of products to improve product quality and yield.

3.A finished product air-conveying system can be set to promptly separate the dry finished products with the hot wet air in the system to prevent moisture absorption or caking of dry finished products.

三、工藝流程圖Process flow diagram

四、技術參數（下表中數值僅供選型時參考）

Technical parameters (the values in the table below are for reference in type selection only)