規格 Specifcations(可選配高速射出240-1000mm/sec及伺服機)
參數(Parameter)\型號(Model) | UNIT | KTW-55T(450-ST) | |||||
射出系統 | 螺桿直徑 Screw Diameter | mm | S(ф22) | 26 | 32 | 36 | |
射出壓力 Iniection Pressure | kg/c㎡ | 2450 | 2300 | 2200 | 1600 | ||
射出量 Max.shot Weight(PS) | g | 55 | 70 | 110 | 130 | ||
螺桿行程 Injection Rate | mm | 140 | |||||
螺桿轉數 Screw Speed Max | Turn | 0-260 | |||||
射嘴行程 Nozzie Retraction | mm | 210 | |||||
溫度控制段數 Number of temperature Cool | Snt | 3/4 | |||||
鎖模系統 | 鎖模力 Clampinh Force | Tons | 55 | ||||
模板尺寸 Platen Size | mm | 650*450 | |||||
模柱間距 Distance Between Tie Bere | mm | 450*260 | |||||
小模厚 Min.Mold Height | mm | 150/200(可根據模厚訂制) | |||||
開模行程 Opening Stroke | mm | 200/230 | |||||
大開模距離 Max.Open daylight | mm | 350/430(訂做機型距離有變化) | |||||
頂出壓力 Ejetor Force | Tons | 3 | |||||
動力電熱系統 | 大液壓壓力 Max.Hydaulic Pressure | kg/c㎡ | 140 | ||||
泵浦吐出量 Pump Outpet | 1/min | 53(伺服機以實際型號為準) | |||||
馬達電力 Pump Motor Power | kw/HP | 11/15KW(伺服電機以實際型號為準) | |||||
電熱容量 Berrel Heating Power | kw | 4.5 | |||||
總用電量 Total Weight | kw | 16/20 | |||||
其它 | 機器重量 Machine Weight | kg | 2000 | ||||
機器外型尺寸 Machine Dimensions(L*W*H) | m | 2.0*1.5*3.0 |
規格若有修改,恕不另通知!Specifcations are subject to change without prior notice!