規格 Specifcations(可選配高速射出240-1000mm/sec及伺服機)
參數/型號 | UNIT | KWT-100T-SD | KWT-120T-SD | |||||||
射出系統 | 螺桿直徑 Screw Diameter | mm | S(ф28) | 40 | 45 | S(ф26) | 36 | 42 | 48 | |
射出壓力 Iniection Pressure | kg/c㎡ | 2300 | 2100 | 1600 | 2400 | 2300 | 1700 | 1500 | ||
射出量 Max.shot Weight(PS) | g | 80 | 200 | 230 | 160 | 160 | 220 | 250 | ||
螺桿行程 Injection Rate | mm | 180 | 180 | |||||||
螺桿轉數 Screw Speed Max | Turn | 0-260 | 0-260 | |||||||
射嘴行程 Nozzie Retraction | mm | 220 | 220 | |||||||
溫度控制段數 Number of temperature Cool | Snt | 4/5 | 4/5 | |||||||
鎖模系統 | 鎖模力 Clampinh Force | Tons | 100 | 120 | ||||||
滑板尺寸 Skate Size | mm | 520*1200 | 630*1300 | |||||||
模柱間距 Distance Between Tie Bere | mm | 550*430 | 650*450 | |||||||
小模厚 Min.Mold Height | mm | 250/300(可根據模厚訂制) | 250/300(可根據模厚訂制) | |||||||
開模行程 Opening Stroke | mm | 250(可特殊訂做300mm) | 250(可特殊訂做300mm/350mm) | |||||||
大開模距離 Max.Open daylight | mm | 500/550(訂做機型距離有變化) | 500/550(訂做機型距離有變化) | |||||||
頂出壓力 Ejetor Force | Tons | 4 | 4 | |||||||
動力電熱系統 | 大液壓壓力 Max.Hydaulic Pressure | kg/c㎡ | 160 | 160 | ||||||
泵浦吐出量 Pump Outpet | 1/min | 65(伺服機以實際型號為準) | 73(伺服機以實際型號為準) | |||||||
馬達電力 Pump Motor Power | kw/HP | 15/20HP(伺服電機以實際型號為準) | 18.5/25HP(伺服電機以實際型號為準) | |||||||
電熱容量 Berrel Heating Power | kw | 7 | 7.5 | |||||||
總用電量 Total Weight | kw | 22 | 26 | |||||||
其它 | 機器重量 Machine Weight | kg | 4800 | 5300 | ||||||
機器外型尺寸 Machine Dimensions(L*W*H) | m | 2.4*1.6*3.4 | 2.5*1.8*3.8 |
規格若有修改,恕不另通知!Specifcations are subject to change without prior notice!