規格 Specifcations(可選配高速射出240-1000mm/sec及伺服機)
參數(Parameter)\型號(Model) | UNIT | KWT-45T-B | KWT-55T-B | ||||
射出系統 | 螺桿直徑 Screw Diameter | mm | 26 | 30 | 30 | 32 | |
射出壓力 Iniection Pressure | kg/c㎡ | 2000 | 1800 | 2000 | 1800 | ||
射出量 Max.shot Weight(PS) | g | 65 | 75 | 80 | 110 | ||
螺桿行程 Injection Rate | mm | 140 | 140 | ||||
螺桿轉數 Screw Speed Max | Turn | 0-230 | 0-230 | ||||
射嘴行程 Nozzie Retraction | mm | 210 | 210 | ||||
溫度控制段數 Number of temperature Cool | Snt | _ | _ | ||||
鎖模系統 | 鎖模力 Clampinh Force | Tons | 45 | 55 | |||
模板尺寸 Platen Size | mm | 630*430 | 650*450 | ||||
模柱間距 Distance Between Tie Bere | mm | 430*250 | 450*260 | ||||
小模厚 Min.Mold Height | mm | 100/150(可根據模厚訂制) | 150/200(可根據模厚訂制) | ||||
開模行程 Opening Stroke | mm | 200 | 200 | ||||
大開模距離 Max.Open daylight | mm | 300/350(訂做機型距離有變化) | 350/400(訂做機型距離有變化) | ||||
頂出壓力 Ejetor Force | Tons | 3 | 3 | ||||
動力電熱系統 | 大液壓壓力 Max.Hydaulic Pressure | kg/c㎡ | 140 | 140 | |||
泵浦吐出量 Pump Outpet | 1/min | 49(伺服機以實際型號為準) | 53(伺服機以實際型號為準) | ||||
馬達電力 Pump Motor Power | kw/HP | 7.5/10HP(伺服電機以實際型號為準) | 11/15HP(伺服電機以實際型號為準) | ||||
電熱容量 Berrel Heating Power | kw | _ | _ | ||||
總用電量 Total Weight | kw | 8 | 11.5 | ||||
其它 | 機器重量 Machine Weight | kg | 1600 | 2200 | |||
機器外型尺寸 Machine Dimensions(L*W*H) | m | 1.7*1.2*2.8 | 2.0*1.5*3.0 |
規格若有修改,恕不另通知!Specifcations are subject to change without prior notice!