PET/PETG /PLA/PMMA/PCCRYSTAL DRYING SYSTEM
PET/PETG/PLA/PMMA/PC
樹脂擠出成型結晶干燥系統
尼嘉斯的結晶及干燥系統設備以豐富的干燥技術、程序化的電腦控制技術以高性能的機械技術為基礎,高效地解決片材的擠出生產過程中所產生的片材脆化、含水分解、粘度降低、酸性劣化等品質問題。
The NIASI crystal&drying system equipment is built on experienced drying technology,programmed computer control and high performance of mechanical technology, which efficiently solves the problems e.g. sheet orpiece brittleness, resolve with water, reduce of viscosity and degradation of acid etc. during the plastic extrusion processing course.
尼嘉斯的結晶、干燥系統設備以人性化設計為基礎操作使用、保養快捷簡便確保擠出生產線連續穩定地提供干燥完成的樹脂原料。
The NIASI crystal&drying system equipment with humanized designed which can easy and efficient assure the supply of dried resin material incessantly and steadily.
尼嘉斯的樹脂結晶、干燥系統設備要求對溫度、風量、風壓、輸送時間等系統參數進行在線高精度控制、并使用系統內交互熱能充分利用、大幅度降低了能耗。系統過濾裝置可高效過濾原料中的粉塵,確保制品的品質穩定。
The NIASI crystal&drying system equipment requires for high precisely control of the air temperature, volume, pressure and feeding time etc.and fully use of the internal heat energy which can greatly reduce the consumption of energy power. Also the filter equipment could efficiently reduce the powder or duster in material this highly helps to keep the high quality of the products.
干燥能力參照表 Specifications for Drying Capacity
原料 | 干燥 溫度 | 干燥 時間 | 比熱 | 原料 比重 | 除濕 前含 水率 | 除濕 后含 水率 | 干燥能力 | ||||||||||||||
ND-30 | 50 | 80 | 120 | 150 | 200 | 300 | 400 | 500 | 700 | 1000 | 1500 | 2000 | 3000 | 4000 | |||||||
ABS | 80 | 2-3 | 0.34 | 0.6 | 0.3 | 0.02 | 11 | 18 | 27 | 35 | 71 | 200 | 180 | 210 | 285 | 355 | 425 | 710 | 1065 | 1500 | 1600 |
CA | 75 | 2-3 | 0.5 | 0.5 | 1 | 0.02 | 9 | 15 | 22 | 30 | 60 | 105 | 150 | 180 | 235 | 295 | 355 | 590 | 885 | 1200 | 1330 |
CAB | 75 | 2-3 | 0.5 | 0.5 | 0.8 | 0.02 | 9 | 15 | 22 | 30 | 60 | 90 | 150 | 180 | 235 | 295 | 355 | 590 | 885 | 1200 | 1330 |
CP | 75 | 2-3 | 0.6 | 0.6 | 1 | 0.02 | 11 | 18 | 27 | 35 | 71 | 90 | 180 | 210 | 235 | 355 | 425 | 710 | 1060 | 1500 | 1600 |
LCP | 150 | 4 | 0.6 | 0.6 | 0.04 | 0.02 | 8 | 13 | 20 | 27 | 55 | 106 | 135 | 160 | 210 | 265 | 320 | 530 | 800 | 1150 | 1200 |
POM | 100 | 2 | 0.35 | 0.6 | 0.2 | 0.02 | 16 | 27 | 40 | 53 | 105 | 80 | 265 | 320 | 425 | 530 | 640 | 1060 | 1600 | 1800 | 2400 |
IONOMER | 90 | 3-4 | 0.55 | 0.5 | 0.1 | 0.04 | 7 | 11 | 17 | 22 | 44 | 160 | 111 | 133 | 177 | 220 | 265 | 442 | 663 | 750 | 1000 |
PA6/6.6/6.10 | 75 | 4-6 | 0.4 | 0.65 | 1 | 0.05 | 6 | 10 | 14 | 19 | 38 | 66 | 96 | 115 | 153 | 192 | 230 | 383 | 575 | 960 | 1040 |
PA11 | 75 | 4-5 | 0.58 | 0.65 | 1 | 0.05 | 7 | 12 | 17 | 23 | 46 | 58 | 115 | 138 | 184 | 230 | 275 | 460 | 690 | 780 | 1150 |
PA12 | 75 | 4-5 | 0.28 | 0.65 | 1 | 0.05 | 7 | 12 | 17 | 23 | 46 | 69 | 115 | 138 | 184 | 230 | 275 | 460 | 690 | 780 | 1150 |
PC | 120 | 2-3 | 0.28 | 0.7 | 0.3 | 0.01 | 13 | 21 | 31 | 41 | 83 | 69 | 206 | 250 | 330 | 413 | 495 | 826 | 1238 | 1400 | 1860 |
PU | 90 | 2-3 | 0.45 | 0.65 | 0.3 | 0.02 | 11 | 19 | 29 | 38 | 77 | 124 | 190 | 230 | 307 | 383 | 460 | 767 | 1150 | 1530 | 2080 |
PBT | 130 | 3-4 | 0.3-0.5 | 0.7 | 0.2 | 0.02 | 9 | 15 | 23 | 31 | 62 | 115 | 155 | 186 | 248 | 310 | 372 | 620 | 930 | 1100 | 1600 |
PE | 90 | 1 | 0.55 | 0.6 | 0.01 | <0.01 | 32 | 53 | 80 | 106 | 212 | 93 | 531 | 637 | 850 | 1065 | 1275 | 2125 | 3185 | 3600 | 4800 |
PEI | 150 | 3-4 | 0.6 | 0.6 | 0.25 | 0.02 | 8 | 13 | 20 | 27 | 53 | 318 | 133 | 160 | 212 | 265 | 320 | 530 | 800 | 1030 | 1370 |
PET | 160 | 4-6 | 0.3-0.5 | 0.85 | 0.2 | 0.05 | 8 | 13 | 19 | 25 | 50 | 80 | 125 | 150 | 200 | 250 | 300 | 500 | 750 | 1150 | 1360 |
PETG | 70 | 3-4 | 0.6 | 0.6 | 0.5 | 0.02 | 8 | 13 | 20 | 27 | 53 | 75 | 133 | 160 | 212 | 265 | 320 | 530 | 800 | 1030 | 1370 |
PEN | 170 | 5 | 0.85 | 0.85 | 0.1 | 0.05 | 9 | 15 | 23 | 30 | 60 | 90 | 150 | 180 | 240 | 300 | 360 | 600 | 900 | 1150 | 1360 |
PES | 150 | 4 | 0.7 | 0.7 | 0.8 | 0.02 | 9 | 15 | 23 | 30 | 60 | 90 | 150 | 180 | 240 | 630 | 360 | 600 | 900 | 1050 | 1400 |
PMMA | 80 | 3 | 0.65 | 0.65 | 0.5 | 0.02 | 11 | 19 | 29 | 38 | 77 | 115 | 190 | 230 | 310 | 385 | 460 | 765 | 1150 | 1530 | 1730 |
PPO | 110 | 1-2 | 0.4 | 0.5 | 0.1 | 0.04 | 13 | 22 | 33 | 44 | 88 | 133 | 220 | 265 | 355 | 440 | 530 | 885 | 1330 | 1730 | 2660 |
PPS | 150 | 3-4 | 0.6 | 0.6 | 0.1 | 0.02 | 8 | 13 | 20 | 27 | 53 | 80 | 133 | 160 | 212 | 265 | 320 | 530 | 800 | 1030 | 1370 |
PU | 120 | 2 | 0.27 | 0.6 | 0.4 | 0.02 | 16 | 27 | 40 | 53 | 105 | 160 | 265 | 320 | 425 | 530 | 640 | 1060 | 1600 | 1800 | 2400 |
PP | 90 | 1 | 0.46 | 0.5 | 0.1 | 0.02 | 26 | 44 | 66 | 88 | 180 | 265 | 442 | 530 | 710 | 885 | 1060 | 1770 | 2655 | 3500 | 4000 |
GP(GP) | 80 | 1 | 0.28 | 0.5 | 0.1 | 0.02 | 26 | 44 | 66 | 88 | 180 | 265 | 442 | 531 | 708 | 885 | 1062 | 1770 | 2655 | 3500 | 4000 |
PSU | 120 | 3-4 | 0.31 | 0.65 | 0.3 | 0.02 | 8 | 14 | 22 | 29 | 60 | 85 | 145 | 173 | 230 | 290 | 345 | 575 | 865 | 1300 | 1485 |
PVC | 70 | 1-2 | 0.2 | 0.5 | 0.1 | 0.02 | 13 | 22 | 33 | 44 | 90 | 135 | 220 | 265 | 355 | 442 | 530 | 885 | 1330 | 1730 | 2660 |
PAN(AS) | 80 | 14-2 | 0.32 | 0.5 | 0.1 | 0.05 | 13 | 22 | 33 | 44 | 90 | 135 | 220 | 265 | 355 | 442 | 530 | 885 | 1330 | 1730 | 2660 |
TPE | 110 | 3 | 0.7 | 0.7 | 0.1 | 0.02 | 13 | 20 | 30 | 40 | 85 | 125 | 205 | 250 | 330 | 413 | 495 | 826 | 1238 | 1650 | 1860 |
☆如何選擇所需之除濕機的機型:為達到*效率,
請取干燥能力表的 80%,
對照所需的原料及干燥能力,即可尋得正確的機型
例如:欲干燥 80kg/hr 的 PET,則 ND-300 即為適當的選擇
東莞市尼嘉斯塑膠機械有限公司:
尼嘉斯--節能管控,改觀現狀,異軍突起的思維
累積專業制造經驗--25年塑廠流程設備;
整體規劃*實力--南亞、臺塑、中華各大塑業集園(23年佳績);
行遍東南亞各國大廠--現場施作10T--2000T儲槽;
塑料專業流程經歷--與日本,德國,美國擠出成型設計配套!
東莞市尼嘉斯塑膠機械有限公司
地 址:廣東省東莞市常平鎮漱舊工業區工業二路1號
電 話:
手 機:
聯 系 人:梁